Windshield Washer Reservoir: Service and Repair

Washer Reservoir Replacement

1. Open the hood and remove the right front inner fender Front Inner Fender Replacement.

2. Disconnect the 2P connectors (A) from the windshield washer motor (B), washer fluid level switch (C), and the headlight washer motor (D) (if equipped).






With headlight washer





Without headlight washer





3. Disconnect the washer tube(s), then if necessary, remove the washer motor, the washer fluid level switch (C), and the headlight washer motor (D) (if equipped).

NOTE: Fluid may flow out of the opening.

4. Remove the right headlight Headlight Replacement.

5. Remove the three bolts (A) from the washer reservoir (B).





6. Install the washer reservoir in the reverse order of removal. Check the washer motor operation.