Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2012 >> MDX V6-3.7L >> Repair and Diagnosis >> Maintenance >> Fuses and Circuit Breakers >> Fuse Block >> Service and Repair >> Rear Fuse/Relay Box Removal/Installation
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Fuse/Relay Box Removal/Installation




Rear Fuse/Relay Box Removal and Installation

NOTE: SRS components are located in this area. Review the SRS component locations Locations, and precautions and procedures Service and Repair before doing repairs or servicing.

Removal

1. Do the battery terminal disconnection procedure, and wait for at least 3 minutes.

2. Remove the left rear side trim panel Interior Trim Removal/Installation - Rear Side Area.

3. Disconnect the connectors from the rear fuse/relay box (A).





4. Remove the mounting nuts and the rear fuse/relay box Testing and Inspection.

5. Carefully remove the relays by prying under the base of the relay.

NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start or cause other functions to fail.

Installation

1. Install the relays and connect the connectors to the rear fuse/relay box, then install the rear fuse/relay box in the reverse order of removal.

2. Install the removed parts in the reverse order of removal.

3. Do the battery terminal reconnection procedure.

4. Confirm that all systems work properly.

pro multis · About Operation CHARM