Control Unit: Service and Repair

SH-AWD(R) Control Unit Replacement

With BSI

1. Remove the BSI control unit BSI Control Unit Removal/Installation.

2. Remove the SH-AWD control unit (A).





3. Disconnect the SH-AWD control unit connectors (B).

4. Install the SH-AWD control unit in the reverse order of removal.

5. If the SH-AWD control unit was replaced, it must be initialized SH-AWD Control Unit Initialization, otherwise the SH-AWD system will not function.

Without BSI

1. Remove the rear left side trim panel cover (A).






2. Remove the cargo rear trim panel Interior Trim Removal/Installation - Cargo Area.

3. Remove the SH-AWD control unit (A).





4. Disconnect the SH-AWD control unit connectors (B).

5. Install the SH-AWD control unit in the reverse order of removal.

6. If the SH-AWD control unit was replaced, it must be initialized SH-AWD Control Unit Initialization, otherwise the SH-AWD system will not function.