Door Lock Knob Switch Test

Door Lock Knob Switch Test

Driver's Door

1. Remove the driver's door panel Front Door Panel Removal / Installation.

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check for continuity between the terminals in each switch position according to the table.





4. If the continuity is not as specified, the driver's door lock knob switch is faulty; replace the door latch Service and Repair.

Passenger's Door

1. Remove the passenger's door panel:

- Front passenger's door panel Front Door Panel Removal / Installation
- Rear door panel Rear Door Panel Removal / Installation

2. Disconnect the 10P connector (A) from the actuator (B).






3. Check for continuity between the terminals in each switch position according to the table.





[ ]: Left rear door

4. If the continuity is not specified, door lock knob switch is faulty; replace the door latch:

- Front passenger's door latch Service and Repair

- Rear door latch Service and Repair