Operation CHARM: Car repair manuals for everyone.
Home >> Acura >> 2012 >> RL V6-3.7L >> Repair and Diagnosis >> Starting and Charging >> Power and Ground Distribution >> Relays and Modules - Power and Ground Distribution >> Power Distribution Module >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Power Distribution Module: Testing and Inspection




Relay Control Module Input Test

1. Turn the ignition switch to LOCK (0), and remove the under-hood fuse/relay box under cover Under-Hood Fuse/Relay Box Removal and Installation.

2. Disconnect under-hood fuse/relay box connector J (10P).





3. Inspect the connector and socket terminals to be sure they are all making good contact.

- If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 4.

4. Reconnect the connector to the under-hood fuse/relay box, and do the following input tests.

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, go to step 5.





5. Disconnect under-hood fuse/relay box connector J (10P), and do the following input tests.

- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, the relay control module must be faulty, replace the under-hood fuse/relay box Under-Hood Fuse/Relay Box Removal and Installation.





pro multis · About Operation CHARM