Tightening Specifications

CAMSHAFT BEARING CAPS 15 Ft. Lbs. (20 Nm)

CRANK PULLEY BOLT 258 Ft. Lbs. (350 Nm)

CAMSHAFT PULLEY 59 Ft. Lbs. (80 Nm)

CYLINDER HEAD BOLTS

Fig. 3 Cylinder Head Tightening Sequence:

Stage 1 29 Ft. Lbs. (40 Nm)
Stage 2 44 Ft. Lbs. (60 Nm)
Stage 3 180°

FLYWHEEL BOLTS
With Shoulder 74 Ft. Lbs. (100 Nm)
Without Shoulder 55 Ft. Lbs. (75 Nm)

MAIN BEARING CAPS 47 Ft. Lbs. (65 Nm)

OIL PUMP TO BLOCK
8mm 15 Ft. Lbs. (20 Nm)
6mm 7 Ft. Lbs. (10 Nm)

OIL PUMP PICKUP BOLTS 7 Ft. Lbs. (10 Nm)

REAR MAIN SEAL HOUSING 7 Ft. Lbs. (10 Nm)

ROD BEARING CAPS
Stretch Bolts (Notched) 22 Ft. Lbs. (30 Nm) plus 90°
Rigid Bolts (No notches) 37 Ft. Lbs. (50 Nm)

TIMING COVER BOLTS 7 Ft. Lbs. (10 Nm)

VALVE COVER NUTS 7 Ft. Lbs. (10 Nm)

WATER PUMP BOLTS 15 Ft. Lbs. (20 Nm)