Right Side

1. Remove right side under body cover, then disconnect parking brake cable from right side caliper.
2. Disconnect trapezoidal arm from crossmember and lower, then press parking brake cable out of bracket.
3. Disconnect axle shaft from flange, then remove flange bolt.
4. Place an oil drain pan underneath and remove flange.
5. Pry out oil seal using a suitable prying tool, then drive in new oil seal to stop.
6. Install flange and axle shaft.
7. Reconnect trapezoidal arm, parking brake cable and under body cover.
8. Torque flange to differential bolts to 7 ft. lbs. plus an additional 1/4 turn, axle shaft to flange M8 bolts to 33 ft. lbs., axle shaft to flange M10 bolts to 60 ft. lbs. and trapezoidal arms to crossmember to 63 ft. lbs.