Temperature Sensor Blower Motor

Inst. Panel Interior Temperature Sensor:

1. Remove glove compartment. See procedure as follows;
a. Remove lower instrument panel cover at front passenger side footwell area.
b. Remove left lower cover bracket.
c. Open glove compartment.
d. Remove 2 screws at left side glove compartment edge.
e. Remove 2 screws at right side glove compartment edge.
f. Remove screw at top center (behind lock hook).
g. Press glove compartment toward center of vehicle, and remove downward.
h. Install in reverse of removal.
2. Remove 2 screws B.
3. Remove hose C.
4. Remove blower motor.
5. Install in reverse of removal.

NOTE:
- Hose C must fit properly.
- Visually inspect the harness connectors and contacts before making connections.