Connector Locations

Connector / Component Locations:

1 Harness connectors:
A For Oxygen Sensor (O2S) heater
^ Heater for heated oxygen sensor, right bank
^ Black 2-pin connector
B For Ignition coils
^ Battery positive voltage (B+) supply
^ White connector
C For Heated Oxygen Sensor (HO2S)
^ Signal wire
^ Under connector holder on bulkhead
D For Knock Sensor (KS) # 1
^ Blue connector
E For Engine Speed (RPM) sensor
^ Gray connector
F For Crankshaft Position (CKP) sensor
^ Black connector
4 Harness connectors:
A For Heated Oxygen Sensor # 2
^ Signal wire
B For Oxygen Sensor (02S) # 2 heater
^ Heater for heated oxygen sensor # 2 , left bank
^ Black 2-pin connector
C For Knock Sensor (KS) # 2
^ Blue connector