Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 1992 >> 100CS Quattro Sedan V6-2.8L (AAH) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Mixture Calibration Potentiometer >> Testing and Inspection
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Mixture Calibration Potentiometer: Testing and Inspection

TEST PROCEDURE

- Push back protective boot on MAF sensor connector (leaving sensor connected).

Note:
The connector terminals are appropriately identified on the back of the connector:

- Connect multimeter (Fluke 83 or equivalent) between connector terminals 2 and 4, using adapter cables from VW 1594 connector test kit.

- Switch ignition on.
Specified value: 1.0-7.5 volts

If specified values are not obtained:
The CO% potetiometer is faulty. Replace mass air flow sensor.

pro multis · About Operation CHARM