Code Control Module (Function 07)

- Connect the VAG 1551, Refer to Connecting and Operating VAG 1551 Scan Tool Connecting and Operating VAG 1551 Scan Tool

- After the display appears as shown:

Rapid data transfer HELP
Select function XX

- Select function code.

Note:
Coding must be conducted only with the ignition on and the selector lever in "P" or "N" position. The Accelerator Pedal must remain in the Closed Throttle Position.

Coding Control Module 07

- Display will appear as shown:

Rapid data transfer HELP
07 - Code control module

- Press Q button to enter input.

- Display will appear as shown:

Code control module HELP
Input code number XXXXX

- Input correct code from list.

Coding Country

00000 2.8 L USA
2.5 L TDI Rest of the World
00001 2.8 L Rest of the World
00002 2.6 L Rest of the World
00003 2.2 L Rest of the World
2.4 L Thailand

- Press Q button to enter input.

Note:
If a false code has been entered the control module will retain the old code.
After coding the DTC memory in the control module is automatically erased.

- Press the "arrow" button.

- Display will appear as shown:

Rapid data transfer HELP
Select function XX