Rear

Rear Axle Toe (Front-Wheel-Drive Vehicles), Centering
Individual toe settings on the rear axle cannot be adjusted.
By moving the rear axle within the elongated holes it is possible to center the individual toe settings.
- Loosen securing bolts on mounting brackets.
- Center individual toe settings by moving axle beam within elongated holes at mounting brackets.

If the overall toe setting is outside the allowable tolerance, or if it is not possible to center the individual settings, the axle beam must be checked for damage and replaced if necessary.

The body alignment must also be checked/measured in the area of the rear axle mounting points and serviced as necessary.