Ignition Lock Cable: Testing and Inspection

Turn Ignition Lock To "On" Position:
- It must be possible to shift out of "P" without catching when a force of not more than 25 N (5.6 lb) is applied (to the button of the gearshift).
- It must not be possible to withdraw the ignition key unless the selector lever is in position "P".

Move Selector Lever Into Position "P":
- It must be possible to turn the ignition lock into the withdrawal position without it sticking.

Turn Ignition Lock Into Withdrawal Position.
- When the button (on the gearshift lever) is pressed, it must not be possible to shift the selector lever out of position "P"