Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 1998 >> A4 Quattro Wagon (8D5) V6-2.8L (AHA) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Testing >> Scan Tool Connecting and Initial Checks >> Selectable Functions When Using VAG1551/1552 or VAS5051
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Selectable Functions When Using VAG1551/1552 or VAS5051




Functions under "Engine Electronics" address word 01:

Function 01: Check Control Module Version Ignition switched on -or- Engine running at idle
Function 02: Check DTC Memory Engine running at idle, otherwise crank engine with starter motor for at least 5 sec., then do not switch ignition off
Function 03: Output Diagnostic Test Mode Ignition switched on
Function 04: Basic Setting Engine running at idle
Function 07: Code Control Module Ignition switched on
Function 08: Read Measuring Value Block Ignition switched on -or- Engine running at idle -or- Driving
pro multis · About Operation CHARM