Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 1998 >> A6 Wagon (4A5) V6-2.8L (AHA) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Scan Tool Testing >> Diagnostic Mode 01: Obtain Data
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Diagnostic Mode 01: Obtain Data



Diagnostic Mode 01: Obtain data

Diagnostic Mode 01 is used to display and monitor all emissions related measured values.

Test requirement
- Coolant temperature at least 80�C.

Procedure

- Connect the scan tool.

- Start the engine and run at idle.

- Select "Diagnostic Mode 1: Obtain data.".

- From the following table, select the desired "PID" that is to be monitored, e.g. "PID 05-Coolant temperature".

Note: More than one "PID" may be selected and monitored.

The current values of the component or system that is being monitored will be displayed on the scan tool screen.






- Switch the ignition off.

End of procedure.
pro multis · About Operation CHARM