Front Wheel Toe, Adjusting

Front Wheel Toe, Adjusting

Specifications for wheel alignment, Refer to Alignment, Specifications.





- Loosen lock nut-B.
- Adjust toe on left and right-hand wheels at hex. -A-.

After turning tie rods, ensure that the boots are not twisted.

- Twisted boots wear out quickly.
- Tighten lock nut -B- to 40 Nm (30 ft.lbs.) and check toe in again.

After tightening lock nut -B- it is possible that the value deviates slightly.

If the measured toe lies within the tolerances, the adjustment is correct.