Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2000 >> A4 Sedan (8D2) V6-2.8L (ATQ) >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Transmission and Drivetrain >> Relays and Modules - A/T >> Control Module >> Service and Repair >> Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Removing and Installing



5 Speed Automatic 01V

Automatic Transmission Control Module (TCM) -J217-, removing and installing

Removing






- Remove lower right A-pillar trim and right front door sill trim.
- Detach carpeting from right inside door sill, and raise carpeting approx. 20 cm.
- Unclip box at -A- by pulling it upward.
- Unclip box at -B- as shown.






- Unclip TCM from box (arrows).
- Release catch on multi-pin connector and disconnect connector from TCM See Fig.3

Installing:
Install in reverse order of removal, with the following additional steps:






- Check that clip nut -1- is properly secured.
pro multis · About Operation CHARM