System Specifications

Toothed belt sprocket to camshaft 55 Nm (41 ft lbs)
Idler wheel 45 Nm (33 ft lbs)
Toothed belt tensioning roller 20 Nm (15 ft lbs)
Belt pulley to crankshaft 20 Nm (15 ft lbs)
Toothed belt tensioner 10 Nm (7 ft lbs)
Center bolt (1) to crankshaft 200 Nm (148 ft lbs) + 180° (2)
Camshaft gear to camshaft 55 Nm (41 ft lbs)

(1) Always replace the center bolt.
(2) Two turns of 90 degrees are permissible.