Component Tests and General Diagnostics

Overview Of Sequence Of Operations For Measuring Wheel Alignment
^ Vehicle must only be measured at curb weight

Note: Exception: when measuring the toe-in curve as described in the alignment program instructions.

The following work sequences must be adhered to
1. Check front axle camber centering and adjust if necessary.
2. Check rear axle camber.
3. Check rear axle toe centering and adjust if necessary.
4. If necessary, check toe-in curve on front axle. To determine if the toe-in curve or toe constant "S" needs adjusting.
5. Check front axle toe with vehicle at curb weight and adjust if necessary.