Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2000 >> TT Coupe (8N3) L4-1.8L Turbo (ATC) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair









1 - Rubber pedal cover
2 - 10 Nm
3 - 6-pin harness connector
4 - Accelerator pedal module
- With Throttle Position (TP) sensor -G79- and sender -2- for accelerator pedal position -G185-
- Removing and installing.

Removing and installing accelerator pedal module with Throttle Position (TP) sensor -G79- and sender -2- for accelerator pedal position -G185-
- Remove driver - side storage compartment.







- Disconnect 6-pin harness connector -2-.
- Remove nuts -1- and -3-.
- Remove accelerator pedal module.

Installation is the reverse of removal.

Tightening torque

Component Nm
Accelerator pedal module at pedal mount 10

pro multis · About Operation CHARM