DTC Memory Erasing (Function 5)

Erase DTC Memory (function 05)

Requirements
- DTC Memory checked

Erasing DTC memory
- Press -> button.

Indicated on display


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -5-.

Indicated on display


Rapid data transfer Q
05 - Erase DTC Memory


- Press -Q- button to confirm input.

Indicated on display


Rapid data transfer Q
DTC Memory is erased!


- Press -> button.

Indicated on display


Attention!
DTC Memory is not interrogated


NOTE:
- If display appears as shown, check DTC memory and follow test procedures carefully.
- If ignition was switched off between "Check DTC Memory" and "Erase DTC memory," the memory is not erased. Check DTC memory once again.