Adapting SRI For Oil Change Service Interval (Distance In km)
Adapting SRI For Oil Change Service Interval (Distance In km)
This function is used to enter the distance (in km) until the next oil change service is due (see service schedule "Maintenance Service").
Indicated on display
Rapid data transfer HELP
Select function XX
- Press buttons -1- and -0- to select "Adaptation" function 10 and press -Q- button to confirm input.
Indicated on display
Adaptation Q
Insert channel number XX
- Press buttons -0- and -5- to insert channel 05.
- Press -Q- button to confirm input.
Indicated on display
Channel 5 Adaptation 1 ->
<-1 3->
The display shows the number of kilometers remaining until the next oil change service is due (the "1" indicates 1000 km remaining).
NOTES:
- Values can only be entered in increments of 1000 km. Therefore the distance indicated is in units of 1000.
- In countries where speedometers are calibrated in miles, adjustments must still be made in kilometers. Therefore convert miles to kilometers (miles x 1.609 = kilometers) to get the required adaptation value.
- If the instrument cluster must be replaced, observe notes. Input Values For Instrument Cluster Replacement
- When using the scan tool keypad, only the direct input method can be used.
- If an incorrect value is input, the adaptation" function 10 will be cancelled and must be initiated again.
- Press -> button.
Indicated on display
Channel 5 Adaptation 1
Input adaptation value XXXXX
- Input desired interval value using keypad on VAG1551, fill in leading digits with zeroes "0."
Example:
Specification: 15000 km
Input value: 00015
Indicated on display
Channel 5 Adaptation 1 Q
Input adaptation value 00015
- Press -Q- button to confirm input.
Indicated on display
Channel 5 Adaptation 15 Q
<-1 3->
- Press -Q- button to confirm input.
Indicated on display
Channel 5 Adaptation 15 Q
Store changed value?
- Press -Q- button to confirm input.
Indicated on display
Channel 5 Adaptation 15 ->
Changed value is stored
- Press -> button to end SRI adaptation.