Operation CHARM: Car repair manuals for everyone.

Vehicles With Front Wheel Drive




Fuel Tank Assembly, Component Overview







1 - Return line
- From engine
- Mark before removing
- Note direction of arrow on connecting flange
2 - 20 Nm
3 - Fuel filter
- Location: Arrow points in flow direction.
4 - Holding clamp
- For fuel filter
5 - Supply line
- To the fuel filter
- Mark before removal
- Note direction of arrow on connecting flange
6 - Mounting screw
- 25 Nm
- To connect fuel-filler neck and Ground
7 - Washer
8 - Overflow hose
9 - Rubber cap
10 - Locking ring
11 - Sealing ring

- Replace if damaged.
12 - Cover
13 - Ground - connection

- Location See Fig. 1
- Connect wiring terminal with mounting screw
- After installing, check continuity between metal ring on fuel filler neck and bare chassis Ground point. spec: approx. 0 Ohms
14 - Bleed line
- To EVAP canister
15 - Fuel tank
16 - 25 Nm
17 - Bracket
- For clamp bands
18 - Clamp bands
- Note different lengths
- Note installation direction







Fig. 1 Ground connection installation position
- Route Ground connection -arrow-, as shown in illustration.
- Ensure tight fit of electrical Ground connection to fuel filler neck Ground clamp.







- Attach wiring terminal -1- with screw -2- for fuel filler neck.


CAUTION!
After installation, check for continuity between Ground clamp on filler neck and chassis Ground.


- Specification: approximately 0 Ohms.