Center Floor Panel Attachment Points

Center Floor Panel Attachment Points







Removing
- Remove rear seat.
- Remove bolt - 5 - (1x).

- Always change gasket - 2 -.
- When installing, make sure buckle and/or lap belt engages in guide knob - 4 -.
- Narrow side of buckle and/or lap belt must face in direction of travel.







1 - Lap belt with retractor

NOTE: When installing, make sure that bracket is accessible. If necessary, turn lap belt with retractor.

2 - Seal
3 - Buckle
4 - Guide knob
5 - Bolt
- 50 Nm (37 ft.lb)
- Only use genuine Audi replacement bolts
6 - Lap belt