Clutch Master Cylinder
Clutch Master Cylinder, Removing and Installing
- Dimension -a- = 165 ± 0.5 mm (6.496 ± 0.020 inch)
- Tighten line fitting -B- on clutch master cylinder to 15 Nm (11 ft. lbs.).
- Slide hose -A- onto brake fluid reservoir up to stop.
E-Box in Plenum Chamber
- Tighten nuts -A- to 4 Nm (35 inch lbs.)
- Install cap and hand tighten in diagonal sequence to 4 Nm (35 inch lbs.)
- Imprint on E-box cover.