Wheel Alignment, Mandatory Sequence of Operations For Checking

Wheel alignment, mandatory sequence of operations for checking

Overview of sequence of operations for measuring wheel alignment

^ Vehicle must only be measured at curb weight

Note:
Exception: when measuring the toe-in curve as described in the alignment program instructions.

The following work sequences must be adhered to

1 - Check front axle camber centering and adjust if necessary.
2 - Check rear axle camber and adjust if necessary.
3 - Check rear axle and adjust if necessary.
4 - If necessary, check toe-in curve on front axle.

To determine if the toe-in curve or toe constant "S" needs adjusting.

5 - Check front axle toe with vehicle at curb weight and adjust if necessary.