Diagram 6/4 (Tracks 29-42)

IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions


Central control module for comfort system, Front Hood Switch, Radar Interior Monitoring Control Module 1





ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink

F266 - Front Hood Switch Convenience System Overview

G303 - Radar Interior Monitoring Control Module 1

J285 - Control module with indicator unit in instrument panel insert

J393 - Central control module for comfort system Convenience System Overview

T10d - 10-Pin Connector, grey, connector station A-pillar, left

T14 - 14-Pin Connector, black, in engine compartment, left

T16 - 16-Pin Connector, black, diagnostic connection

T16i - 16-Pin Connector, brown, on central control module for comfort system (used to be Connector 5)

T17f - 17-Pin Connector, orange, connector station A-pillar, left

T20g - 20-Pin Connector, red, on central control module for comfort system (used to be Connector 4)

T32 - 32-Pin Connector, blue, on instrument panel insert

T32a - 32-Pin Connector, green, on instrument panel insert

(12) - Ground connection, in engine compartment, left Component Locations Overview in engine Compartment

(347) - Ground Connection (in roof wiring harness)

(A76) - Wire connection (K-diagnosis wire), in instrument panel wiring harness

* - with alarm system only, discontinued from 2003 m. y. (phased in modification)

Previous Diagram 6/3 (Tracks 15-28)

Next Diagram 6/5 (Tracks 43-56)