Power Seat Control Module: Testing and Inspection

Code Control Module (Function 07)

NOTE:
- Read out coding before removing the existing control module.
- If coding cannot be read out, code using standard coding (00002).
- Control unit is not factory-coded.
- Coding is carried out using the VAS 5051.

If VAS 5051 does not display appropriate code or if control module is replaced, preform control module coding as follows:

Performing Function "07 - Code Control Module"

Indicated on display:


Rapid data transfer HELP
Select function XX


- Press buttons -0- and -7-.

Indicated on display:


Rapid data transfer Q
07 - Code Control Module


- Confirm entry with -Q-button.

Indicated on display:


Encoding control unit
Enter code number XXXXX (0-32000)


- Enter coding for control module memory via the keypad:

Code: 00002
- 00001: Selecting recall button items via remote control key.
- 00002: Selection via remote control key, of last seat / mirror position as vehicle was locked (automatic).
- 00003: All remote control key memory functions off.

NOTE: Remote control key adaptation. Basic Setting (Function 04)