Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2003 >> A4 Sedan (8E2) V6-3.0L (AVK) >> Repair and Diagnosis >> Steering and Suspension >> Steering >> Steering Column >> Steering Column Control Module >> Service and Repair >> Steering Column Switch Module (SCSM), Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Steering Column Switch Module (SCSM), Removing and Installing




Steering Column Switch Module (SCSM), Removing And Installing

Removing
- Remove airbag unit and steering wheel:
- Pull steering column all the way out and down.







- Remove Torx bolts -3- and -5- as well as the hex socket bolt -4-.
- Separate top trim -2- for steering column switches from bottom trim -2-and remove both parts.

To install, insert top trim piece into catches of bottom trim piece, press together and bolt.

NOTE: Wheels must be in straight-ahead position when removing or installing return ring with slip ring.







- Disconnect harness connector -1-.
- Carefully release catch (arrows) and pull return ring with slip ring from steering column switch module (SCSM).
- Remove bolt 9.
- Disconnect electrical harness connectors.
- Carefully pull off steering column switch together with steering column electronic systems control module.

Installing
Installation is reverse of removal, noting the following:
- Make sure that all 3 catches as well as the harness connector are engaged cleanly.
- Zero the Steering Angle Sensor -G85-.

Use VAS5051 tester to do so.
pro multis · About Operation CHARM