Windows and Glass: Service Precautions
Minimum Curing Times
CAUTION:
- For safety reasons, use only electrically non-conductive 2C-adhesive when installing windshield and rear window using the materials listed below.
- Vehicle is only safe for operation after minimum curing time has elapsed and only then may it be used.
Cleaning when soiled by adhesive sealing material
- Adhesive removal solution D 002 000 10 is the recommended cleaning solution. Observe safety precautions when processing.
CAUTION: When cleaning from vehicle interior out, the window just installed must not be pressed outward.
Paint surfaces:
- First, clean paint surfaces with a dry cloth. Remove further material using adhesive removal solution D 002 000 10.
Plastic trim:
- Allow adhesive sealing material to harden (about 1 hour) and then peel off.