Display Group 008

Display Group 008:

Air Flow Flap Motor -V71-

Display Field 1 - 4:

NOTE:
- When vehicle is stationary the back pressure operation position in only attained during the output Diagnostic Test Mode (DTM).
- This actuator motor is installed on left hand steering vehicle only, it moves the back pressure flaps.
- In back pressure air operation the position of the back pressure flaps is programmed from 80 km/h the flaps will be closed depending on the vehicle speed, fresh air fan speed, the selected and actual measured temperatures as well as the selected operation mode of A/C Control Head -E87- The back pressure flaps are not fully closed in back pressure mode (they remain as far open that the necessary air flow remains).
- Additional notes See display group 003