Camshaft, Engine

Bearing cap to cylinder head 5 Nm + 90° 1) 2)
1) 90° corresponds to a quarter turn
2) Replace bolts

Refer to Service procedure for torque sequence.

Intake Camshaft
Check radial clearance with Plastigage (roller-type rocker finger removed)
Wear limit 0.1 mm
Run-out max. 0.01 mm

Exhaust camshaft
Check radial clearance with Plastigage (roller-type rocker finger removed)
Wear limit 0.1 mm
Run-out max. 0.01 mm

Refer to Service procedure for torque sequence.