Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2003 >> TT Coupe (8N3) L4-1.8L Turbo (AWP) >> Repair and Diagnosis >> Starting and Charging >> Starting System >> Ignition Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Ignition Switch: Service and Repair




Ignition/starter switch, removing and installing

CAUTION: Before beginning repairs on the electrical system:

- Obtain the anti-theft radio security code.
- Switch the ignition off.
- Disconnect the battery Ground (GND) strap.
- After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according to Owner's Manual.


Removing
- Remove steering column switches.







- Disconnect electrical connection -4- for immobilizer reader coil (where applicable).







- Disconnect electrical connection -1- on ignition/starter switch -2-.
- Remove sealing paint from the two retaining screws -A-.
- Loosen retaining screws -A- slightly, then pull ignition/starter switch -2 out of steering lock housing -3- in direction of -arrow-.

Installing

NOTE:
- When installing, the ignition/starter switch and the lock cylinder must be in the same position, e.g. "Ignition on."
- Seal the two retaining screws on the steering lock housing with paint again after they are tightened.

- Install in reverse order of removal.
pro multis · About Operation CHARM