Erasing DTC Memory

Erasing DTC Memory

NOTE: If DTC Memory cannot be erased, check DTC Memory again and eliminate malfunction.

Requirements:
- DTC Memory checked
- All malfunctions corrected

After DTC Memory interrogation:
Implementing function "05 - Erase DTC Memory"

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -5-.

Indicated on display:

Rapid data transfer Q
05 - Erase DTC Memory

- Confirm entry with -Q- button.

Indicated on display:

Rapid data transfer
DTC Memory is erased

DTC Memory has been erased.

Indicated on display:

Rapid data transfer HELP
Select function XX

NOTE:
- This message indicates an error in the test sequence.
- This message indicates an error in test sequence.
- Follow test sequence exactly: First check DTC Memory, if necessary eliminate any faults, then erase DTC Memory.
- After erasing DTC Memory, implement End Output with function 06, switch ignition off and on again, then re-check DTC Memory.