Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2004 >> S4 Cabriolet (8H7) V8-4.2L (BHF) >> Repair and Diagnosis >> Power and Ground Distribution >> Fuse Block >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuse Block: Service and Repair



Fuse Box, Removing And Installing

Removing
- Remove driver's storage compartment:







- Remove bolts -1 - for fuse box-2-.
- Remove fuse box from center tube for instrument panel.
- Detach wiring harness on center tube for instrument panel and set aside.







- Cut cable tie -1-.
- Release cover for fuse box -arrows-
- Pull fuses from fuse box.







- Pull off retaining strip for connectors -arrows- and remove connectors from fuse box.
- Unclip base -1-.







NOTE: Check the exact assignment for fuse carrier in the current wiring diagram.

Installing
Installation is reverse of removal, paying attention to the following:

NOTE: All cable ties opened or cut during removal must be reinstalled at the same locations during installation.

Tightening torque

Component Nm
Fuse box to center tube for 3
instrument panel
pro multis · About Operation CHARM