Headlamp Alignment Control Module: Testing and Inspection

Code Control Module (Function 07)

NOTE: "Code Control Module" function 07 is used to program the automatic vertical headlight aim control system control module for:

- Vehicle type
- Drive layout

During coding, option combination possibilities are set.

Coding, initiating

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -7- to select "Code Control Module" function 07.
- Press -Q- button to confirm input.

Indicated on display:

Code Control Module Q
Input code number XXXXX (0-32000)

- Input code number as shown in code table.

Example: 00009

Coding table

Code Vehicle type/drive layout

0009 TT front-wheel drive
0010 TT all-wheel drive

Indicated on display (example only):

Code Control Module Q
Input code number 00009 (0-32000)

- Press -Q- button to confirm input.

Indicated on display: (after about 5 seconds)

4B0907357Vertical Aim Control D003 ->
Coding 00009 WSC 06812

- Press -> button to complete coding.

Indicated on display:

Rapid data transfer HELP
Select function XX

- Press buttons -0- and -6- to select "End Output" function 06.

Indicated on display:

Rapid data transfer Q
06 - End Output

- Press -Q- button to confirm input.