Engine Control Module, Coding Variables (Function 07)

Code Control Module (Scan Tool Function 07)

- Connect vehicle diagnostic, testing and information system VAS 5051 and select vehicle system "01 -Engine electronics" in selection . Ignition must be switched on.

Display on VAS 5051:







- Under -1- select diagnostic function "07 - Encode Engine Control Module".

Display on VAS 5051:







1 - Enter code max. input value = 32767
- Enter 7-digit control module Coding II in button field -2- according to Coding II table.

Clarification of coding







Coding example
07710 LEV, All Wheel Drive (AWD) without antislip
regulation, 6 speed manual transmission, Audi TT

- Confirm entry with -Q- button.

Display on VAS 5051:







1 - Coding II being carried out
- Wait until next display appears.

Display on VAS 5051:







1 - Coding II being carried out in vehicle system
2 - Control module identification with new code (previous code in brackets)
- Exit function "07 - Encode Engine Control Module" by pressing the <- button.