Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2005 >> A4 Sedan (8E2) L4-1.8L Turbo (AMB) >> Repair and Diagnosis >> Heating and Air Conditioning >> Testing and Inspection >> Scan Tool Testing and Procedures >> End Output (Function 06)
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

End Output (Function 06)



End Output (function 06)

Requirements:
- DTC memory checked and erased, basic setting performed and coding checked

NOTE: The currently valid code transmitted by the Instrument Cluster Control Module J285 is displayed in the measuring value block (display group "019"). Measuring Value Blocks (Function 08)







Indicated on display of Diagnostic Operation System VAS 5051A
- Select function "06 - End of output".







- Wait until this display (start menu) appears on Diagnostic Operation System VAS 5051A.
- Switch off ignition and disconnect diagnostic connector.
pro multis · About Operation CHARM