Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Rear Bumper Access/Start Authorization Antenna






Access/Start Authorization System

Rear Bumper Access/Start Authorization Antenna

Removing





- Remove rear bumper cover.

- Disconnect electrical connector - 2 -.

- Remove screws - arrows -.

- Remove Access/Start Authorization Antenna (in rear bumper) (R136) - item 1 - from bumper cover.

Installing

Install in reverse order of removal, observing the following:

- Install the cover on the rear bumper.

Vehicles with Lane Change Assist

If the bumper cover was removed, the lane change assistance control module (J769)/ (J770) must be calibrated again. Refer to => [ Lane Change Assistance, Preparing for Calibration ] Lane Change Assistance, Preparing for Calibration.

Tightening Specifications