Digital Sound System Control Module 2, Bang and Olufsen

Radio System

Digital Sound System Control Module 2, BANG and OLUFSEN

- Switch off all electrical consumers.

- Remove the key.

Removing

- Open left luggage compartment storage bin.

- First remove Digital Sound System Control Module (J525). Refer to => [ Digital Sound System Control Module, BANG and OLUFSEN ]. Digital Sound System Control Module, Bang and Olufsen

• The Digital Sound System Control Module 2 (J787) must be removed with bracket.

- Disconnect electrical connection - 3 - on digital sound system control module 2.





- Remove the nuts - 1 -, - 4 - and - 5 - (3 Nm) and remove bracket - 2 - with digital sound system control module 2 toward right.

- Remove nuts - 1 - and - 2 - on rear side (3 Nm).





- Rotate the bracket - 3 - together with the digital sound system control module 2 - 4 - and remove the nuts - 1 - and - 2 - (3 Nm).





- Remove digital sound system control module 2 - 4 - from bracket - 3 -.





Installing

- Install in reverse order.