Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2005 >> A8 Quattro Sedan (4E2) V8-4.2L (BFM) >> Repair and Diagnosis >> Body and Frame >> Seats >> Memory Positioning Systems >> Memory Positioning Switch >> Service and Repair >> Memory Seat Switch, Removing and Installing
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Memory Seat Switch, Removing and Installing



Memory Seat Switch, Removing And Installing

Removing
- Switch off ignition and remove ignition key.
- Remove front door trim panel.
- Detach insulating mat from door trim.







- Remove bolts - arrows - and remove speaker trim.







- Unplug connector - 1 - .
- Remove bolts - arrows - and detach storage compartment from door trim.







- Use Allen wrench to remove pin - 1 - for actuating storage compartment catch and pin - 2 - for stop.
- Repeat procedure on other side of storage compartment.
- Open storage compartment.







- Remove switch cover panel - 1 - - arrows - .







- Lift rear of switch - arrow 1 - and detach towards inside of storage compartment - arrow 2 - .







- Disconnect electrical harness connector - 1 - at memory seat switch - 2 - .
- Carefully release catches - arrows - using a small screwdriver.
- Pull memory seat switch downwards out of switch mount.

Installing
Install in reverse order of removal, observing the following:
- Press switch into switch mount until fasteners engage.
- Install front door trim panel.
pro multis · About Operation CHARM