Operation CHARM: Car repair manuals for everyone.
Home >> Audi >> 2005 >> S4 Quattro Sedan (8E2) V8-4.2L (BHF) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Level Sensor >> Service and Repair >> Fuel Level Sensor G, Removing and Installing - From 11.04
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Fuel Level Sensor G, Removing and Installing - From 11.04



Fuel Level Sensor G, Removing And Installing







Removing
Observe safety precautions
Observe rules for cleanliness.
- Remove fuel delivery unit.
- Release retaining tabs - arrows - with a screwdriver and pull Fuel Level Sensor G upward and out.







- Disengage electrical connectors - 1 - and - 2 - and disconnect them.

Installing
Installation is in reverse order of removal. Note the following:
- Connect electrical connections - 1 - and - 2 - and check that they are securely engaged.
- Insert Fuel Level Sensor G in the guides on fuel delivery unit and push down until it engages.
- Install fuel delivery unit, observing notes for connecting battery.
pro multis · About Operation CHARM