Fuel Level Sensor: Service and Repair

Fuel Level Sensor -G-, Removing And Installing

Removing
Observe safety precautions.
Observe rules for cleanliness.

- Remove fuel pump.







- Disengage connector prongs of electrical wires -3- and -4- and disconnect.
- Pry off retaining straps -1- and -2- using screwdriver and remove fuel level sensor toward bottom (arrow).

Installing
Installation is the reverse of removal, noting the following:
- Insert fuel level sensor into guides at Fuel Pump (FP) and press up until engagement.
- Insert connector prongs of electrical wires and check for proper engagement.
- Install Fuel Pump (FP).
- Observe notes for connection of battery.