Transmission Control Module, Basic Setting Adaptation Values

Transmission Control Module, Basic Setting Adaptation Values

• Following repairs to the valve body (e.g. replacing solenoid valves), if the valve body, the torque converter or the transmission is replaced, the adaptation values in the Transmission Control Module (TCM) should be reset. This allows the adaptation values for normal operation in the Transmission Control Module (TCM) to be learned more quickly following resumption of operation.

• Adaptation values in the Transmission Control Module (TCM) are reset if:

- multiple connector is removed from Transmission Control Module (TCM) for at least 15 minutes => [ Transmission Control Module ] 01V,01VA Transmission

- battery is disconnected for at least 15 minutes =>
Starting and Charging Starting and Charging