Telematics System
Telematics
=> [ Telephone/Telematics Control Module ]
=> [ Auxiliary Speaker (Telematics) ]
=> [ Telematics Control Head ]
Telephone/Telematics Control Module
• If control module is replaced, select "Replacement" function for appropriate control module in "Guided Fault-Finding" routine. Use the Vehicle Diagnosis, Testing and Information System (VAS 5051) to do so.
- Switch off all electrical consumers.
- Remove the key.
Removing
- Remove the left front seat.
- Fold back the floor covering.
- Disengage cover of electronics box and open the box - arrows -.
Telephone/Telematics control module (J526) and emergency battery (Telematics) (A16) are only wedged into the electronics box.
- Pry telephone/Telematics control module - 1 - out of electronics box - 2 - in direction of arrow.
- Disconnect all harness connectors at telephone/Telematics control module.
- Remove emergency battery (Telematics).
Installing
- Install in reverse order of removal.
Auxiliary Speaker (Telematics)
- Switch off all electrical consumers.
- Remove the key.
Removing
- Remove the lower B-pillar trim on the front passenger side.
- Disconnect harness connectors and remove trim.
- Twist open the mount - 1 - on the Telematics auxiliary speaker (R91) - 2 - in - direction of arrow - and remove the Telematics auxiliary speaker - 2 -.
Installing
- Install in reverse order of removal.
Telematics Control Head
- Switch off all electrical consumers.
- Remove the key.
Removing
- Remove the Front Interior Light (W1).
- Disconnect electrical connection - 1 - and unclip it from the retainer - 2 -.
- On the front side of front interior light, unclip the Telematics Control Head (E264) from retainer - arrow 2 - and swivel the telematics control head upward out of front interior light - arrow 1 -.
Installing
- Install in reverse order of removal.