Headrest Guides With Backrest Installed

Rear Bench Seat Cushion and Upholstery

Headrest Guides with Backrest Installed

• For the sake of illustration, headrest guide - 1 - is shown removed.





Removing

- Insert an upholstery needle or screwdriver - 3 - (max. width 2 mm) into hole - 4 - (hole - 4 - is located across from retaining clip for headrest guide).

- Push screwdriver - 3 - in direction of arrow - A - to press catch - 2 - in direction of arrow - B - and pull out headrest guide - 1 -.

Installing

- Ensure that headrest guides are installed with buttons on the left side in the direction of vehicle travel.