High Pressure Sensor Connector Assignment
High Pressure Sensor Connector Assignment
- Contact 1 - Ground
- Contact 2 - signal output (square wave signal to Climatronic Control Module (J255) front A/C control head)
- Contact 3 - Positive (terminal 75)
• With harness connector - B - disconnected, the compressor will not switch on.
• High pressure sensor - A - is an electronic control module; it creates a square wave signal, the duty cycle ratio changes with pressure in the refrigerant circuit. Refer to => [ High Pressure Sensor Pressure Signal ] High Pressure Sensor Pressure Signal.
•