Rear A/C Control Head (Climatronic) -E265-, Reading

Read Measuring Value Block (Rear A/C Control Head (Climatronic) -E265-) (Function 08)
- With ignition off, connect up vehicle diagnostic, testing and information system VAS 5051 with diagnostic cable VAS 5051/5A to 16-pin Data Link Connector (DLC) in vehicle.
- Switch on ignition or start engine.
- Set "Auto" mode on Climatronic Control Module -J255-.
- Use address word "28" to select rear air conditioner operating element.

Indicated on display of VAS 5051:







- Check DTC memory. With Manufacturer Scan Tool
- Select function "08 - Read Measuring Value Block".

Indicated on display of VAS 5051:







- Prompt for entering display group appears in display zone -1-.
- Input keypad appears in display zone -2-.
- Use input keypad in display zone -2- to enter desired display group (e.g."001" or "01" for "Display group number 001") List of available display group numbers, and confirm by touching Q-key. Display Group 001 - 007

Indicated on display of VAS 5051:







- Display group selected appears in display zone -1-.
- The values for the four display zones appear in display zone -2-:
- Value for display zone "1" appears on first line.







- Values for respective display zones appear on second, third and fourth lines.
- Line remains blank if a display zone is not used.
- Different display group can be selected by touching keys -3-.
- Different function can be selected by touching keys -4- (e.g. to switch from "Read Measuring Value Block" to "Basic Setting" and back again).
- Enter display group number List of available display group numbers. Display Group 001 - 007