Instrument Panel Button

Instrument Panel Lamps and Switches

Observe notes on contact corrosion. Refer to => [ Contact Corrosion ] Service Precautions.

Instrument Panel Button

Removing





- Switch off ignition and remove ignition key.

- Remove the trim with the right switch strip.

- Loosen bolt - 3 - a few turns.

- Remove the switch strip - 2 - from the trim - 1 - - arrow -.

Installing

Install in reverse order of removal, observing the following:

- Press switch module into mount in trim panel and bolt on.

- Install the trim with the right switch strip.

Tightening Specifications