Diagram 121/9 (Tracks 99-112)
IMPORTANT NOTE:
This manufacturer uses "Track" style wiring diagrams.
For information on how to use these diagrams effectively, please refer to Diagram Information and Instructions. Diagram Information and Instructions
Engine Control Module (ECM), Camshaft Position (CMP) Sensor, Intake Manifold Runner Position Sensor, Throttle Valve Control Module
ws = white
sw = black
ro = red
br = brown
gn = green
bl = blue
gr = grey
li = lilac
ge = yellow
or = orange
rs = pink
G40 - Camshaft Position (CMP) Sensor Engine Management Systems Locations
G186 - Throttle Drive (for Electronic Power Control (EPC) Engine Management Systems Locations
G187 - Throttle Drive Angle Sensor 1 (for Electronic Power Control (EPC) Engine Management Systems Locations
G188 - Throttle Drive Angle Sensor 2 (for Electronic Power Control (EPC) Engine Management Systems Locations
G300 - Camshaft Position (CMP) Sensor 3 Engine Management Systems Locations
G336 - Intake Manifold Runner Position Sensor Engine Management Systems Locations
G512 - Intake Manifold Runner Position Sensor 2 Engine Management Systems Locations
J338 - Throttle Valve Control Module Engine Management Systems Locations
J623 - Engine Control Module (ECM) Control Modules Overview
T60 - 60-Pin Connector, black (Connector A), on engine control module (ECM)
(220) - Sensor Ground Connection (in engine wiring harness)
(327) - Sensor Ground Connection (in engine compartment wiring harness)
(E16) - Plus Connection (5V) (in Motronic wiring harness)
Previous Diagram 121/8 (Tracks 85-98)
Next Diagram 121/10 (Tracks 113-126)